How to install cabinet door handle

The hole distance of the cabinet door handle is generally a multiple of 32 mm, the common small size is 96 mm, and there are many larger models, such as 128 mm and 192 mm. The installation steps usually look like this:

1. Use a tape measure to measure the installation hole distance of the handle;

2. Use the handle to draw down the cabinet door panel, and measure the installation position on the cabinet door (wardrobe or cabinet);

3. Select the appropriate size drill bit, plug in the electric drill to start the electric drill, and use the drill bit to drill the screw mounting holes;

4. Hold the handle on the outside, and thread the screws from the inside of the cabinet to the outside on the inside;

5. Align the screws with the handle mounting holes and tighten them with a screwdriver.